Adjustable Speed Frequency Control Φ1500mm Pipe Surface Cleaning Shot Blasting Machine
Pipe Surface Cleaning Shot Blasting Machine is mainly used for a variety of diameter pipe wall surface cleaning, it can in the original state of the steel surface impose a strong shot blasting, remove the rust on its rust layer and its oxide, so that a certain degree of uniformity of finish Of the metal glossy surface, in order to remove stress, improve the steel surface coating quality and corrosion resistance.
In order to ensure the cleaning effect of the workpiece, and the use of the main room roller table was ordered, especially in the main room roller table with high chromium wear-resistant sheath, so you can extend the use of roller table was ordered several times.
Technical parameter
1, Workpiece size
| Diameter | ≤φ1500mm |
| Length | 6000-15000mm |
| Thickness | 1.4-22mm |
2, Roller conveyor system (adjustable speed)
(1) Enter the roller table
| Walking speed | 0.5-5m / min |
| Reducer power | 2.2KW |
| Reducer Model | BWY22-87-2.2kw |
| Roller length | 8000mm |
(2) the output roller
| Walking speed | 0.5-5m / min |
| Roller length | 8000mm |
| Reducer power | 2.2KW |
| Reducer Model | BWY22-87-2.2kw |
3, shot blasting machine (frequency control)
| Model | Q034 |
| Speed | 65-70m / s |
| Shot amount | 3 × 200min |
| Power | 3 × 7.5KW |
4, hoist
| Lifting capacity | 36T / h |
| Power | 5.5KW |
5, the separator
| Separation amount | 36T / h |
| Separation area wind speed | 4-5m / S |
6, the vertical screw conveyor
| Delivery | 36T / h |
| Power | 4kw |
7, horizontal screw conveyor
| Delivery capacity | 36T / h |
8, dust removal system
Dust collector
| - Model | LT-24 |
| - Air volume | 10500m3 / h |
Centrifugal Fan
| - Model | 4-72No5A |
| - Air flow | 12500m3 / h |
| - Wind pressure | 2200 MPa |
| - Power | 15kw |
9, the whole machine power: about 55kw
10, the total amount of ventilation: 12500m3 / h
11, quality standards
| - Surface quality | Sa2-Sa3.0 level |
| - Surface roughness | about 15 ~ 50um |
12, equipment noise (operating area): ≤ 95Db
Working conditions:
The altitude is not more than 1000m;
Ambient air temperature range: -10 DEG C to +40 c.;
Air relative humidity: when the daily average temperature is not more than 25 degrees centigrade, the average relative humidity is 90% in the wettest month;
Grid voltage fluctuation: within + 10% (when the grid frequency is rated)
The grid frequency fluctuation: less than 1% (when the grid voltage rated value).
2, working environment
The equipment shall be placed in an explosive or corrosive industrial gas that does not seriously endanger or affect the normal use of the equipment Steam, salt fog and chemical deposits, and should be away from severe vibration and turbulence occasions
Product Tags:
|
|
2.2KW H Beam Shot Blasting Machine Images
|
